-

 
Products and Projects
          
   MEDICAL IMAGING - RADIOGRAPHIC GRID ENCASEMENTS
   MEDICAL STERILIZER - INTERLOCKING SEAL, PRESSURE DOOR
  DENTAL CHAIR - NOVEL HANDPIECE SWIVEL
  WIND TURBINE HUB - AUTO ANGLE OF ATTACK MECHANISM
  Mr. COFFEE FILTERS - CHINESE MOLD PROCESS CONSULTING / IMPORTING
  HYPER-TRIKE - PARALLELOGRAM SPINOUT MECHANISM
 
FLIP CLIP - AUTOMOTIVE CRADLE FOR MOTOROLA FLIP PHONE,
  - OLD, IN-HOUSE PRODUCT

 

FITS-ALL - ELECTRONICS MOUNTING BRACKET,
  - CURRENT, IN-HOUSE-PRODUCT

 


  DRW GP, conceptualized and designed for Carestream Health for their DRX-1 System. The design features three levels of drop protection and increased patient positioning strength. Patented.    

 

 

 

 

 

   14 X 17 DR Aluminum Grid Encasement.   14 X17 DR Weight Bearing Cap.
  Atal 8c GP Aluminum Grid Encasement with molded shock absorbing rubber corners.   Atal 8 GP Aluminum Grid Encasement.
    Atal 8c Weight Bearing Cap.    Canon CXDI-55C Aluminum Grid Encasement with molder shock absorbing rubber corners.
  IDEXX 10 x 12 Equine Weight Bearing concept design.   Rayence 1417PGA Aluminum Grid Encasement with molded shock absorbing rubber corners.
  Samsung axis DR system 14 X 17 Aluminum Grid Encasement with molded shock absorbing rubber corners.   14 X 17 Under Patient, Fully Enclosed, Weight Bearing Grid Encasement.
  VIVIX-S Aluminum Grid Encasement with molded shock absorbing rubber corners.   Fully Enclosed Weight Bearing Caps in the 3 standard sizes for barn and Podiatry applications.

MEDICAL STERILIZER DOOR MECHANISM
Conceptualized and designed for Joslyn Sterilizer, Farmington, NY
 
  Due to the highly pressurized Ethylene Oxide gas used in this sterilizer, this door latch design had to be 100% pressure proof! This was achieved using multiple horizontal steel bars that interlocked with corresponding steel tine side plates. The door was opened by first moving it upward to disengage the bar/tine interlock and then swung outward.
  A full set of Stainless Steel front panels for the sterilizer body and door was also designed as part of this project.

DENTAL CHAIR COMPONENTS DESIGNED FOR THE RITTER COMPANY

  Conceptualized and designed the dentist interface components of new dental office system that included creating a novel dental-handpiece swivel concept that reduced the part count from more than 30  parts to 4 parts. This design was immediately copied by company’s primary offshore competitor.

AUTO ANGLE OF ATTACK WIND TURBINE HUB
Created and designed for Arista Power formally WindTamer, Rochester, NY
 
  This design concept automatically decreased the angle-of-attack for each blade in relation to increased angular velocity in proportion to the centrifugal force on each rotating blade working against a countering spring force.
   

Mr. COFFEE FILTERS - Mold Process Consulting & Importing
For Tiantia Zhenxing Wire Mesh Factory, Zhejiang Province, China
 
I worked with Siong Fei Ge of Tiantia Zhenxing Wire Mesh Factory to correct wrinkles in the coffee filter insert-molded wire mesh. I determined that the mesh needed to be preheated to  compensate for  PC / Stainless Steel cooling shrinkage-rate differences.
   

Represented Tiantia Zhenxing Wire Mesh Factory as an importer to sell filters to Mr. Coffee.

HYPER-TRIKE Spin-Out toy trike
created, designed and prototyped for Design Inc, Newton, NJ
 
  Working from the product concept sketch, the parallelogram Tilt-Lift concept was created, designed and prototyped.
    
    

The FLIP CLIP is an old in-house product

  

Created, designed and manufactured the industry’s first phone specific cell phone cradle, the Flip Clip® cradle for Motorola’s first “pocket-sized” cell phone, the DPC-550 “Flip-Phone.”

Successfully defended a trademark infringement dispute brought by Motorola Corp.

Twice featured on the cover of The Wall Street Journal, AP and newspapers worldwide.

 


Read May 2009 article:

See the Fits-ALL install  Power Point presentation from  our CES show kiosk:

 

The Fits-All™ mount is a universal, installer modifiable, automotive electronics mounting bracket!

Install ANY dash mounted device in ANY vehicle using JUST THIS ONE BRACKET!

One Mount, One SKU, Fits-ALL™!

                  

GPS NAV. UNITS                 PDA,S           CELL PHONES        MP3,S       SATELLITE RADIOS

-  A SECOND dash mounted DEVICE! WORKS With ANY VEHICLE!!!!
-  INSTALL THE UNIT TODAY! ALWAYS IN STOCK!
-  Where the CUSTOMER WANTS IT! No expensive OVERNIGHT orders
-  LOWER $$ than dash-specific-mounts! LIFETIME WARRANTY!
8 WAY ORIENTATION! PATENTED
-  Same day at LOWER hardware cost! 100% MADE IN THE USA!

- Innovative, multifunctional package with  instructions & two prototyping templates.

          

Remember,  having a Fits-ALL in stock is like having Babe Ruth on the bench!

Read the article in:     Get a .pdf copy of our product flyer:  


The Fits-All™ mount is a universal, installer modifiable, automotive electronics mounting bracket that is installed in the dash using existing or non-visible holes. The 4 way AMPS and NEC mounting hole pattern (Up, Down, Right & Left) and dual modifiable mounting tabs allow the experienced installer to locate the bracket where the installer, and the customer, want it.

The Fits-All™ mount has ALL the installed features of the current vehicle-specific mounts: no exposed holes, nearly invisible mount, OEM look, all at a lower purchase cost. Additionally, it provides the install shop with two very powerful sales tools: one-visit customer turn-around and the ability to install the phone where the customer wants it!

Also, the Fits-All™ mount is the ideal complement to vehicle-specific mounts for the install shop that wants to give its valued customers TOTAL - INSTANT - GRATIFICATION!